Customize Steel Lost Wax Casting Part

Customize Steel Lost Wax Casting Part
Product Details

Product description:

This Customize Steel Lost Wax Casting Part is not as susceptible to corrosion, rust or water contamination as ordinary steel. However, in low oxygen, high salinity or poor air circulation, it is not completely resistant to contamination. Stainless steel is available in different grades and finishes to suit the environment the alloy must withstand. Stainless steel castings are used where steel properties and corrosion resistance are required. This Customize Steel Lost Wax Casting Part differs from carbon steel castings in the amount of chromium present. Unprotected carbon steel is prone to rust when exposed to air and moisture. This iron oxide film is active, and accelerates corrosion by forming more iron oxide; and, since the volume of iron oxide is large, it tends to peel off and fall off. Stainless steel contains enough chromium to form a chromium oxide passivation film that prevents further surface corrosion by preventing oxygen from diffusing to the steel surface and preventing corrosion from diffusing into the metal internal structure. Due to the similar size of the steel and oxide ions, they bind very strongly and remain attached to the surface. This Customize Steel Lost Wax Casting Part is used in many applications where corrosion resistance and material strength are critical.

Products show and scope


Product specifications:

1,customize steel lost wax casting part

2,Material:Q235normal carbon steel.


4,Process:lostwax castingand hole drilling,hole roughness:Ra0.8

5,Surface:shot blasted

6,Used in yachtindustry.

7,Place of origin in zhenhai,Ningbo

8,Tolerance in CT8 grade.

9,Sampling in 30days .






Mold stock

CNC in making mold

Material stock

Wax injection





Shell buliding room

Shell baking room

Casting in grinding cast gate

Products ready after shot blasted


packed in wooden case.jpg


Packed in the pallet

Packed in wooden case

Pallet wrapped with plastic film in container

Test equipmentand test bars:





Spectrum analyzer

Tensile testing machine

Hardness tester

notch bar impact

Tensil strength Test bar


Q: Can you do the design service ?

A: It is OK , tell us your request , we can design and make rapid 3D prototype to check .

Q: How about the production time ?

A: According the quantity and usually in about one month . however we suggest to place order early before new year time . it is crazy busy from the Christmas and Chinese spring festival .

Q: Which country did you export to ?

A: Most are export to West Europe and north Europe and North America area.

Q: Can you provide the samples ? is the sample free?

A: Most of sample are worked by tooling , we need to invest . so the sample is not free. However we can share the cost with customer . if the tooling or mold is not expensive , we can make the sample free for our old customer.

Contact Us Now!!